How to Create a Leopard Gecko Tank Setup
The first step in setting up a leopard gecko tank is determining the proper humidity level. You want to have the humidity level of the tank in the range of 20 to 40 percent.
To measure the humidity level, you can purchase a hygrometer. You can also increase air flow by adding a mesh lid and moist moss. Adding a water dish is also an easy way to increase humidity.
When choosing plants for your leopard gecko tank, be sure to consider how they will affect the temperatures in the tank. If you use a heat lamp, it can damage your plants.
To avoid damaging your plants, place your heater on the side of the tank. This way, the heat will go into the tank but will not affect the roots of your plants.
You can still use a heating mat if you want to prevent your leopard gecko from becoming ill.
- A leopard gecko enclosure cannot be smaller than ten gallons.
- You need at least a 20 gallon aquarium. Even a smaller aquarium will not be sufficient for a leopard gecko.
- Adding plants will cover 20 percent of the tank’s surface, so a 30-gallon aquarium will be more than enough.
- To make sure your gecko does not get sick, buy some live plants to mimic their natural habitat.
Creating a proper leopard gecko tank setup includes using rocks and tiles. Tiles and rocks mimic the natural habitat of leopard geckos, so they are ideal for this particular species.
In addition, tiles and rocks are easy to clean, and they are also less likely to cause impaction problems than open sand. If you want to give your leopard gecko a more attractive habitat, you can also use a reptile carpet.
Reptile carpet is specially designed for this type of animal and can be placed on top of rocks and other elements in the tank.
The only drawback to using heat rocks is that they cannot be adjusted for temperature, leaving the gecko at the mercy of the heating element inside.
Also, these rocks do not offer precise temperature control, so they end up unplugged within the enclosure. Moreover, these heaters are not easy to install in a gecko tank.
Moreover, the cord connected to the heat rock must be run from the inside of the tank to an electrical outlet, which is probably already occupied by UV bulbs and basking bulbs.
The first thing that you need to do when you want a Leopard gecko tank setup is to get the right hides. These creatures need three hides each. The more you give them, the more secure they’ll feel and the more room they’ll have to explore.
- A log can act as a great hide, so you’ll need to provide several of these in the tank. A log can also provide a hiding spot for your gecko when it wants to hide from predators.
- Aside from rocks and logs, you’ll also want to provide your gecko with a hiding place. You’ll want to provide four or five hides.
- You can also use pieces of logs, artificial decor, and rocks to create the right environment for your koi. Don’t forget to include a hiding box and other security features. If you don’t have these, you can purchase one for your pet to hide in.
For optimal health and well-being, consider installing UVB lighting in your leopard gecko tank. Though leopard geckos can survive without UVB, a lack of it can lead to many health issues. Luckily, there are several options for UVB lighting.
You can choose between Solarmeter 6.5 or the Arcadia ShadeDweller 7% fluorescent tube.
If you choose to use the Solarmeter 6.5, be sure to set the UV Index to between 0.5 and 1.5. When choosing a light for your leopard gecko tank, be sure to choose one that differs from the UVB. This will allow your pet to distinguish between daytime and nighttime.
Ideally, you should use a 5.0-watt UVB bulb. Also, you should use a thermostat to adjust the temperature twice a year to accommodate for the summer/winter cycle. Be sure to monitor your leopard gecko’s behavior to avoid overheating.
The ideal humidity level for a leopard gecko tank setup is between thirty to forty percent.
However, if you don’t have this kind of knowledge, you should know how to increase the humidity level of your leopard gecko’s habitat.
To increase the humidity level, you can mist the habitat or put moist substrate in it. It’s also important to increase the air flow and ventilation of the habitat.
If you can’t get this level of humidity, invest in a quality hygrometer. Otherwise, you might be making unnecessary changes to the humidity levels.
Another way to lower the humidity of the leopard gecko’s enclosure is to install a dehumidifier. These devices measure humidity with a digital readout and a waterproof probe.
A good option is the Zoo Med Labs Digital Thermometer Humidity Gauge, which comes with a waterproof probe. Another option is the Govee Wireless Thermometer Hygrometer, which offers a wireless app control and real-time temperature and humidity monitoring. The device is compact and highly accurate.
Plastic tank options
There are two main types of leopard gecko tanks: wooden and plastic. Both materials have their pros and cons. Wood is porous and absorbs water, but plastic is less expensive and provides a better view during the evening hours.
Plastic can scratch easily, however, and is not as hygienic as glass. Plastic vivaria are more prone to bacteria and can also scratch easily. Wooden tanks also tend to be smaller than glass vivaria.
To make sure that your leopard gecko is receiving the proper temperature and humidity levels, you can place dual thermometers in the tank.
It is advisable to place one thermometer on the warm end of the enclosure and another one in the cool end.
While lighting is not essential for leopard geckos, it can improve their mental well-being and behavior. If you’re unsure whether or not lighting is necessary, check the enclosure’s thermometer to make sure that the temperature is the correct one.
If the temperature is too warm or too cool, your gecko could die.
We hope you enjoyed this article… What are your thoughts?
Please feel free to share this article!
We strive to provide the latest valuable information for pet lovers with accuracy and fairness. If you would like to add to this post or advertise with us, don’t hesitate to reach us. If you see something that doesn’t look right, contact us!